15 tonne Franna crane hire: AT-15
Our purple Franna AT-15 is the smallest and nimblest crane in the fleet. It needs no outriggers and sets up fast on driveways, narrow streets and backyards.
Small crane, tight sites
The Franna AT-15 is a 15 tonne articulated pick-and-carry crane. It lifts without outriggers, so it can pick up a load, drive with it on the hook and set it down exactly where it's needed.
It's the most compact crane we run, which makes it the go-to for house blocks, steep Airlie streets, pools and spas. The boom reaches 17.9m with the manual extension, or 20.5m with the fly jib.
Up to 15T on the boom lugs.
Lifts and drives with the load, no outriggers.
Pivots up to 40° each way for tight sites.
17.9m boom, more with the fly jib.
15T Franna AT-15 specs
Figures from the Terex Franna AT-15 rated capacity manual. Capacity depends on radius, boom length, articulation and ground, so check the load chart or send us the job and Lofty will confirm the crane.
Lifting
Boom, jib and hook- Max capacity 15 tonne
- Boom reach 11.8 to 17.9m
- With fly jib Up to 20.5m
- On the winch Up to 10.5 tonne
- Lift points Winch, rhino hook and boom lugs
- Man basket Available
Carrier and set-up
Steering and travel- Type Articulated pick and carry
- Articulation Up to 40° each way
- Outriggers Not needed
- Pick and carry speed Up to 1.44km/h with a load
- Travel Drives to site on the road
Residential and tight-access lifts
When access is tight or the job is light, the AT-15 is usually the right crane.
Residential
Pool shells, spas, air conditioners and materials on house blocks. Residential crane hire
Building materials
Roof trusses, steel, glass and pallets onto smaller sites. Construction crane hire
Plant and equipment
Machinery, tanks and equipment in yards and sheds. Industrial crane hire
Marine
Dinghies, tenders and small boats at the ramps. Marine crane hire
Ground, access and lift planning
Frannas need firm, level ground to lift and carry their full capacity, and capacity drops on slopes, soft ground and when the crane is articulated. Lofty checks the ground, access, overhead lines and the travel path before the job, and prepares the lift plan and Safe Work Method Statement.
- Free on-site assessment before we quote
- Lift plan and SWMS prepared for every job
- Licensed operator and dogman supplied
- Can dual lift with our other Frannas
Need a bigger crane?
For heavier pick-and-carry there's the 20T and 25T Frannas, and the 55T and 80T for height and weight.
See every crane side by side: Our fleet. Choosing a crane: Plan your lift
The Whitsundays and the islands
The AT-15 works from our Cannon Valley yard right across the Whitsunday region, from Airlie Beach, Cannonvale and Jubilee Pocket to Proserpine, Midge Point, Bowen and Collinsville. Ask us about island jobs.
Whitsunday Islands
Lifts on the resort islands.
Airlie Beach
Our home patch, close to the yard.
Proserpine to Bowen
Across the rest of the region.
Western mine sites
Mine and industrial work out west.
Book the 15T Franna
Tell Lofty or Casey what you're lifting, how heavy it is and where it's going. Free, no-obligation quotes and on-site assessments.