20 tonne Franna crane hire: AT-20
Our yellow and green Franna AT-20. No outriggers and minimal set-up, so it's quick on tight streets, building sites, civil works and boat ramps.
Our all-rounder Franna
The Franna AT-20 is a 20 tonne articulated pick-and-carry crane. Like all our Frannas it lifts without outriggers, so it can pick up a load, drive with it on the hook and set it down where it needs to go.
It steers by pivoting in the middle, up to 40 degrees each way, and the boom reaches from 13.85m to 17.9m, or 20.8m with the fly jib. It's the crane we use most for panels, containers, pool shells and civil work.
The middle of our Franna range.
Lifts and drives with the load, no outriggers.
Pivots up to 40° each way for tight sites.
17.9m boom, more with the fly jib.
20T Franna AT-20 specs
Figures from the Terex Franna AT-20 rated capacity manual. Capacity depends on radius, boom length, articulation and ground, so check the load chart or send us the job and Lofty will confirm the crane.
Lifting
Boom, jib and hook- Max capacity 20 tonne
- Boom reach 13.85 to 17.9m
- With fly jib Up to 20.8m
- Fly jib offset 0° or 12.5°
- Lift points Hook block, rhino hook and boom lugs
- Hook block 1 to 4 part
Carrier and set-up
Steering and travel- Type Articulated pick and carry
- Articulation Up to 40° each way
- Outriggers Not needed
- Pick and carry speed Up to 1.44km/h with a load
- Travel Drives to site on the road
Building, civil and residential lifts
The AT-20 covers more everyday jobs than any other crane in the fleet.
Building materials
Insulated panels, roofing, steel and pallets onto building sites. Construction crane hire
Civil and roadworks
Culverts, pipes and precast for council and civil contractors. Construction crane hire
Residential
Pool shells, spas, excavators and materials on house blocks. Residential crane hire
Containers and marine
Shipping containers, pontoons and boats at the ramps. Marine crane hire
Ground, access and lift planning
Frannas need firm, level ground to lift and carry their full capacity, and capacity drops on slopes, soft ground and when the crane is articulated. Lofty checks the ground, access, overhead lines and the travel path before the job, and prepares the lift plan and Safe Work Method Statement.
- Free on-site assessment before we quote
- Lift plan and SWMS prepared for every job
- Licensed operator and dogman supplied
- Can dual lift with our other Frannas
Need a different crane?
For the tightest sites the 15T Franna is smaller again. For heavier pick-and-carry there's the 25T, and the 55T and 80T for height and weight. For major projects we source cranes up to 350T.
See every crane side by side: Our fleet. Choosing a crane: Plan your lift
The Whitsundays and the islands
The AT-20 works from our Cannon Valley yard right across the Whitsunday region, from Airlie Beach, Cannonvale and Jubilee Pocket to Proserpine, Midge Point, Bowen and Collinsville. Ask us about island jobs.
Whitsunday Islands
Lifts on the resort islands.
Airlie Beach
Our home patch, close to the yard.
Proserpine to Bowen
Across the rest of the region.
Western mine sites
Mine and industrial work out west.
Book the 20T Franna
Tell Lofty or Casey what you're lifting, how heavy it is and where it's going. Free, no-obligation quotes and on-site assessments.