25 tonne Franna crane hire: MAC25
The biggest Franna in our fleet. Pick-and-carry with no outriggers, so it can lift, drive and place heavier loads on tight sites, boatyards and building jobs.
Our heaviest pick-and-carry crane
The Franna MAC25 is a 25 tonne articulated pick-and-carry crane. It doesn't need outriggers, so it can pick up a load, drive with it on the hook and place it, all without setting up.
It steers by pivoting in the middle, up to 40 degrees each way, which makes it handy in boatyards, tight streets and busy sites. A detachable 1.5 tonne counterweight can go on the back to lift more across the chart.
The heaviest Franna in the fleet.
Lifts and drives with the load, no outriggers.
Pivots up to 40° each way for tight sites.
18.4m tip height, more with the fly jib.
25T Franna MAC25 specs
Figures from the Terex Franna MAC25 rated capacity manual. Capacity depends on radius, boom length, counterweight and ground, so check the load chart or send us the job and Lofty will confirm the crane.
Lifting
Boom, jib and hook- Max capacity 25 tonne
- Tip height 18.4m
- Tip height with fly jib Up to 21.4m
- Fly jib 3m or 4m, with offset
- Hook block 6 falls for 25 tonne
- Winch rope 14mm, 110m
Carrier and set-up
Steering, counterweight and tyres- Type Articulated pick and carry
- Articulation Up to 40° each way
- Outriggers Not needed
- Counterweight 1.5t detachable, front or rear
- Front tyres Dual 14.00 x 20
- Travel Drives to site on the road
Heavier pick-and-carry lifts
The MAC25 takes the jobs that are a bit too heavy for our 15T and 20T Frannas but still suit pick-and-carry.
Boatyards and marine
Catamarans, hulls and boats moved around boatyards and hardstands. Marine crane hire
Building and steel
Steel beams, portal frames, panels and materials on building sites. Construction crane hire
Residential
Pool shells, spas, tiny homes and pods on house blocks. Residential crane hire
Industrial yards
Machinery, containers and plant moved around yards and sheds. Industrial crane hire
Ground, access and lift planning
Frannas need firm, level ground to lift and carry their full capacity, and capacity drops on slopes and soft ground. Lofty checks the ground, access, overhead lines and the travel path before the job, and prepares the lift plan and Safe Work Method Statement.
- Free on-site assessment before we quote
- Lift plan and SWMS prepared for every job
- Licensed operator and dogman supplied
- Can dual lift with our other Frannas
Need a different crane?
For lighter lifts, the 15T and 20T Frannas are smaller and quicker. For more height or weight, step up to the 55T or 80T, and we source cranes up to 350T for major projects.
See every crane side by side: Our fleet. Choosing a crane: Plan your lift
The Whitsundays and the islands
The MAC25 works from our Cannon Valley yard across the Whitsunday region, from Airlie Beach, Shute Harbour and Jubilee Pocket to Proserpine, Midge Point and Bowen. Ask us about island jobs.
Whitsunday Islands
Lifts on the resort islands.
Airlie Beach
Our home patch, close to the yard.
Proserpine to Bowen
Across the rest of the region.
Western mine sites
Mine and industrial work out west.
Book the 25T Franna
Tell Lofty or Casey what you're lifting, how heavy it is and where it's going. Free, no-obligation quotes and on-site assessments.